Monday, June 8, 2020

Solution Manual for Separation process principles, Second Edition byJ D Seader, Ernest J Henley






Solution Manual for: Separation process principles, 2 nd Edition ByJ D Seader, Ernest J Henley


-- ch. 1. Separation process

-- ch. 2. Thermodynamics of separation operations

-- ch. 3. Mass transfer and diffusion

-- ch. 4. Single equilibrium stages and flash calculation s

-- ch. 5. cascades and hybrid systems

-- ch. 6. Absorption and stripping of dilute mixtures

-- ch. 7. Distillation of binary mixtures

 -- ch. 8. Liquid-liquid extraction with ternary systems

-- ch. 9. Approximate methods for multicomponent, multistage separations

-- ch. 10. Equilibrium-based methods for multicomponent absorption, stripping, distillation, and extraction

-- ch. 11. Enhanced distillation and supercritical extraction

-- ch. 12. Rate-based models for distillation

-- ch. 13. Batch distillation

-- ch. 14. Membrane separation s

-- ch. 15. Adsorption, ion exchange, and chromatography

-- ch. 16. Leaching and washing

-- ch. 17. Crystallization, desublimation, and evaporation

-- ch. 18. Drying of solids

Link:

Download (30.7 MB)

Tuesday, May 19, 2020

Analytical Chemistry, 7th Edition By: Christian, Sandy & Schug




Christian, Purnendu K. (Sandy) Dasgupta and Kevin A. Schug. published by John Wiley & Sons, Inc. in 2014. (7th Edition)

This edition has two new coauthors, Purnendu (Sandy) Dasgupta and Kevin Schug, both from the University of Texas at Arlington. So the authorship now spans three generations of analytical chemists who have each brought their considerable expertise in both teaching and research interests to this book. While all chapters have ultimately been revised and updated by all authors, the three authors have spearheaded different tasks.


This seventh edition is extensively rewritten, offering new and updated material. The goal is to provide the student with a foundation of the analytical process, tools, and computational methods and resources, and to illustrate with problems that bring realism to the practice and importance of analytical chemistry.


CONTENTS:
  • Analytical Objectives, or: What Analytical Chemists Do
  • Basic Tools and Operations of Analytical Chemistry
  • Statistics and Data Handling in Analytical Chemistry
  • Good Laboratory Practice: Quality Assurance and Method Validation
  • Stoichiometric Calculations: The Workhorse of the Analyst
  • General Concepts of Chemical Equilibrium
  • Acid–Base Equilibria
  • Acid–Base Titrations
  • Complexometric Reactions and Titrations
  • Gravimetric Analysis and Precipitation Equilibria
  • Precipitation Reactions and Titrations
  • Electrochemical Cells and Electrode Potentials
  • Potentiometric Electrodes and Potentiometry
  • Redox and Potentiometric Titrations
  • Voltammetry and Electrochemical Sensors
  • Spectrochemical Methods
  • Atomic Spectrometric Methods
  • Sample Preparation: Solvent and Solid-Phase Extraction
  • Chromatography: Principles and Theory
  • Gas Chromatography
  • Liquid Chromatography and Electrophoresis
  • Mass Spectrometry
  • Kinetic Methods of Analysis
  • Automation in Measurements
  • Clinical Chemistry
  • Environmental Sampling and Analysis
  • Century of the Gene—Genomics and Proteomics: DNA Sequencing and Protein Profiling.

      Download Link:
                               Drobpox (18.40 MB)

Thursday, June 2, 2016

Monday, February 1, 2016

Buy essential books to learn HYSYS Simulation


In this post I shall show you many essential books to learn and master one of the most famous chemical processing simulation software Aspen HYSYS:

 

1-      Aspen HYSYS: An Introduction to Chemical Engineering Simulation: For Chemical Engineering Undergraduate Students Paperback – March 20, 2013
         By Mohd. Kamaruddin Abd. Hamid (Author)


 

Aspen HYSYS: An Introduction to Chemical Engineering Simulations is intended for students who are using Aspen HYSYS for the first time and have little or no experience in computer simulation. It can be used as a textbook in freshmen chemical engineering courses, or workshops where Aspen HYSYS is being taught. The book can also serve as a reference in more advanced chemical engineering courses when Aspen HYSYS is used as a tool for simulation and solving problems. It also can be used for self study of Aspen HYSYS by students and practicing engineers. In addition, the book can be a supplement or a secondary book in courses where Aspen HYSYS is used, but the instructor does not have time to cover it extensively.
 
Buy the hardcopy from:
  
                                                                 


2-      Hysys Software For Chemical and Petroleum Engineering Paperback – March 5, 2014
        By Ahmmed Saadi Ibrahem  (Author), Aref Wazwaz (Author)

 

This work is provided a lot of examples in different fields of chemical engineering to design accurate solutions by using HYSYS soft ware. Chapter 1 includes basic rules of HYSYS soft ware to inputs data and conditions of the processes. Chapter 2 gives deep explain about distillation column to install it in chemical plant. This book shows in the other chapters’ scientific steps to install for different separation process using different examples and also, provides different examples in heat transfer, mass transfer, modeling and chemical reaction for CSTR reactor to solve these problems depends on HYSYS soft ware.
 
 
 
Buy it from:
 
                                                                



3-      HYSYS and Aspen Plus in Process Design Paperback – February 17, 2015
        By Rao K. Naga Malleswara  (Author)

 

 
The three stages of Process Design procedure are 1)Conceptual design stage 2)Preliminary Design stage and 3)Detailed Design stage. These three stages are well explained in this book. Process Design Procedure developed in this book using Preliminary process calculations (Hand calculations), HYSYS and ASPEN PLUS V8.0 can be applied to various other Chemical Process Designs. This book also can serve as a class room text for senior and graduate level chemical Process design courses at the University level. It is especially useful for Chemical Engineers.

 

Request hardcopy from:
 
                                                                           

4-      Chemical Process Simulation and the Aspen HYSYS v8.3 Software Paperback – November 28, 2013  By Michael E. Hanyak Jr  (Author)
 
 
The document Chemical Process Simulation and the Aspen HYSYS v8.3 Software is a self-paced instructional manual that aids students in learning how to use a chemical process simulator and how a process simulator models material balances, phase equilibria, and energy balances for chemical process units. The student learning is driven by the development of the material and energy requirements for a specific chemical process flowsheet. This semester-long, problem-based learning activity is intended to be a student-based independent study, with about two-hour support provided once a week by a student teaching assistant to answer any questions. Chapter 1 of this HYSYS manual provides an overview of the problem assignment to make styrene monomer from toluene and methanol. Chapter 2 presents ten tutorials to introduce the student to the HYSYS simulation software. The first six of these tutorials can be completed in a two-week period for the introductory chemical engineering course. The other four are intended for the senior-level design course. Chapter 3 provides five assignments to develop the student’s abilities and confidence to simulate individual process units using HYSYS. These five assignments can be completed over a three-week period. Chapter 4 contains seven assignments to develop the styrene monomer flowsheet. These seven assignments can be completed over a seven-week period. In Chapter 4, each member of a four-, five-, or six-member team begins with the process reactor unit for a specifically-assigned temperature, molar conversion, and yield. Subsequent assignments increase the complexity of the flowsheet by adding process units, one by one, until the complete flowsheet with recycle is simulated in HYSYS. The team’s objective is to determine the operating temperature for the reactor, such that the net profit is maximized before considering federal taxes. Finally, eleven appendices provide mathematical explanations of how HYSYS does its calculations for various process units—process stream, stream tee, stream mixer, pump, valve, heater/cooler, chemical reactor, two-phase separator, three-phase separator, component splitter, and simple distillation. This HYSYS manual can be used with most textbooks for the introductory course on chemical engineering, like Elementary Principles of Chemical Processes (Felder and Rousseau, 2005), Basic Principles and Calculations in Chemical Engineering (Himmelblau and Riggs, 2004), or Introduction to Chemical Processes: Principles, Analysis, Synthesis (Murphy, 2007). It can also be used as a refresher for chemical engineering seniors in their process engineering design course. Because the HYSYS manuscript was compiled using Adobe Acrobat®, it contains many web links. Using a supplied web address and Acrobat Reader®, students can electronically access the web links that appear in many of the chapters. These web links access Aspen HYSYS®, Acrobat PDF®, Microsoft Word®, and Microsoft Excel® files that appear in many of chapters. Students can view but not copy or print the electronic version of the HYSYS manual.
 
Request it from: 

 
                                                                       



5-      Design & Cost Estimation of Ethylene Production Unit From Naphta: Naphtha cracking process is simulated with ASPEN HYSYS then design and cost estimation is done with ASPEN ICARUS Paperback – October 15, 2015
       By:  Aref Shahi (Author), Maziar Heidari (Author), Hamed Aghaee (Author)


Ethylene is widely used in chemical industry, and its worldwide production(over 109 million tonnes in 2006) exceeds that of any other organic compound. Commercially ethylene is obtained by(1)thermal cracking of hydrocarbons such as ethane, propane, butane, naphtha, kerosene, gasoil, crude oil,etc,(2) auto thermic cracking (partial oxidation) of the above hydrocarbons,(3)recovery from refinery off-gas,(4) recovery from coke-oven gas, and(5) catalytic dehydration of ethyl alcohol or ethyl ether. The thermal cracking process is the most interesting process to produce ethylene commercially .At this project production of ethylene from naphtha is studied. Naphtha, an important feedstock for ethylene production, is a collective of liquid hydrocarbon intermediate oil refining products. It is a mixture of hydrocarbons in the boiling point range of 30-200ÂșC. it is fed to the naphtha cracking furnace. Then, the cracked gas is fed to gasoline fractionator, where it separates the quench oil as a bottom and the cracked gasoline and lighter components as the overhead products. Then, the overhead products are separated in different column.
 
Request it from: 
                                                           

Saturday, January 30, 2016

Bioprocess Engineering: Basic Concepts, By Michael L. Shuler, Fikret Kargi


Michael L. Shuler, Fikret Kargi , "Bioprocess Engineering: Basic Concepts"
2001 | 2 edition | ISBN-10: 0130819085, 0131228579 | 576 pages | PDF | 20 MB

 
For Senior-level and graduate courses in Biochemical Engineering, and for programs in Agricultural and Biological Engineering or Bioengineering.
This concise yet comprehensive text introduces the essential concepts of bioprocessing―internal structure and functions of different types of microorganisms, major metabolic pathways, enzymes, microbial genetics, kinetics and stoichiometry of growth and product information―to traditional chemical engineers and those in related disciplines. It explores the engineering principles necessary for bioprocess synthesis and design, and illustrates the application of these principles to modern biotechnology for production of pharmaceuticals and biologics, solution of environmental problems, production of commodities, and medical applications.
Download Link:
                                                                              Dropbox (19.6 MB)
Request your hardcopy from:
 


                                                                      

Thursday, January 28, 2016

Survey of Industrial Chemistry - Chenier, Third Edition



Survey of Industrial Chemistry (Topics in Applied Chemistry) 3rd Edition
by Philip J. Chenier  (Author), ISBN-13: 978-0306472466, ISBN-10: 0306472465, (6.50 MB)

Survey of Industrial Chemistry arose from a need for a basic text dealing with industrial chemistry for use in a one semester, three-credit senior level course taught at the University of Wisconsin-Eau Claire. This edition covers all important areas of the chemical industry, yet it is reasonable that it can be covered in 40 hours of lecture. Also an excellent resource and reference for persons working in the chemical and related industries, it has sections on all important technologies used by these industries: a one-step source to answer most questions on practical, applied chemistry. Young scientists and engineers just entering the workforce will find it especially useful as a readily available handbook to prepare them for a type of chemistry quite different than they have seen in their traditional coursework, whether graduate or undergraduate.

Download link:
                                                       Dropbox (6.50 MB)


Get your Hardcopy from:


                                                             

Wednesday, December 24, 2014

Lubricant Additives: Chemistry and Applications, 2nd Edition by Leslie R. Rudnick





Lubricant Additives: Chemistry and Applications, 2nd Edition
by Leslie R. Rudnick
English | 2009 | ISBN: 1420059645 | 790 pages | PDF | 6.96 MB


Cost, environmental, and performance issues coupled with legislative changes, new engine oil requirements, and technology development for exploration of space and the oceans are changing the lubrication additive market. Reflecting how the need for new applications drives the development of new lubricant additives, Lubricant Additives: Chemistry and Applications, Second Edition presents methods to:
- Improve the performance, efficiency, and stability of lubricants
- Protect metal surfaces from wear
- Select lubricant additives for the food processing industry
- Select the most appropriate ashless additives
- Avoid microbial degradation of lubricants
- Lower toxicity

And describes:
- Standard lubricant testing methods and product specifications
- Mechanisms and benefits of specific types of lubricant additives
- Recent industry trends

Up-to-Date Coverage of Lubricant Additive Chemistry and Technology
Addressing new trends in various industrial sectors and improvements in technology, this second edition provides detailed reviews of additives used in lubricant formulations, their chemistry, mechanisms of action, and trends for major areas of application. It explores the design of cost-effective, environmentally friendly lubricant technologies and lubricants for automotive, industrial, manufacturing, aerospace, and food-processing applications. An extensive list of online industry resources is available for download at crcpress.com.

Download Link:  
Dropbox  (6.95 MB) 
 
Request your hardcopy from here: